제품 디렉토리

질문 보내기

*
*

ASME SB SB163 SB165 SB725 모 K500 튜브

지불 유형: L/C,T/T,Money Gram,Western Union

수송: Ocean,Land,Air

최신 가격을 얻으십시오
    Share:
    제품 속성 공급 능력 및 추가 정보
    제품 속성

    모형Monel Tube

    상표유혼

    TypeSeamless

    CertificationCE

    ApplicationBoiler Pipe

    Section ShapeRound

    UsageThermal Equipment

    TechniqueCold Drawn

    MaterialAlloy Steel

    제품 설명

    SB163 / SB165 / SB829 모넬 합금 K500 원활한 니켈 합금 UN05500


    Monel Products

    Monel Pipes 
    We offer high quality monel pipes that can be easily welded and brazed. The composition of the pipe is perfect for application in food processing industry. Our range of monel pipes provide excellent resistance against corrosive media, alkalies and high temperature. 
    Specifications 
    Types :
    Seamless 
    ERW 
    Welded in Round & Square
    Range : 
    SEAMLESS / ERW / WELDED/ FABRICATED
    Grades : 
    Monel 400 (UNS No. N04400)
    Monel 500 (UNS No. N05500)

    Monel Tubes
    We offer high quality monel tubes with inherent resistance to corrosion and high strength. These tubes are perfect for use in marine applications and harsh industrial environments. Our range of monel tubes are available in different outer diameter as per the requirements of the clients.
    Types :
    Seamless 
    ERW 
    Welded in Round & Square
    Range :
    6.35 mm OD up to 254 mm OD in 0.6 to 20 mm Thick
    Grades :
    Monel 400 (UNS No. N04400)
    Monel 500 (UNS No. N05500)

    Monel Sheets, Plates & Coils
    Our range of monel sheets & plates are highly resistant to atmospheric corrosion, salt water and various acid & alkaline solutions. These sheets find diverse applications in different industries such in heat exchangers, brine heaters, cladding for the upper areas of oil refinery crude columns, etc. We can offer monel sheets and plates in different sizes with thickness varying from 0.1 mm to 150 mm. 
    Specifications
    Grades:
    Monel 400 (UNS No. N04400) 
    Monel 500 (UNS No. N05500)

    Monel Rods & Bars
    We offer monel rods in different forms including pre-cut and custom forged. The specifications of these rods comply with International standards. Our range of monel pipe can be availed in different thickness and sizes a per application requirements. 
    Specifications
    Grades : 
    Monel 400 (UNS No. N04400),
    Monel 500 (UNS No. N05500)

    Monel fittings
    Our range of monel fittings can withstand the most severe marine and industrial corrosive environments. These fittings can be easily installed and removed using simple hand tools. We offer monel fittings in variety of designs to meet the specific application requirements.
    Specifications and forms:
    Elbows
    Tees
    Cross
    Reducers
    Flanges
    Specialised pipe fittings
    Drawing and customised fittings
    Grades:
    Monel 400 (UNS No. N04400),
    Monel 500 (UNS No. N05500)

    Monel Flanges
    Our range of monel fittings are suitable for applications in diverse industries. These flanges have accurately drilled hole for perfect installation. We can offer monel flanges in different dimensional specifications at the most competitive prices.
    Specifications
    Grades:
    Monel 400 (UNS No. N04400)
    Monel 500 (UNS No. N05500)




    Monel K500 UNS N05500

    Monel K500은 Monel 400의 탁월한 내식 저항 특성과 경도의 추가 이점과 더 큰 강도의 이점을 결합한 강수량 화성 니켈-코퍼 합금입니다. 이 증폭 된 특성, 강도 및 경도는 니켈-코퍼베이스에 티타늄과 알루미늄을 첨가하고 전형적으로 연령 경화 또는 노화라고하는 강수량에 영향을 미치는 열 처리에 의해 얻어진다. 연령대 조건에서, Monel K-500은 Monel 400보다 일부 환경에서 응력-성분 균열에 대한 경향이 더 높습니다. Monel K-500은 Monel 400과 비교할 때 항복 강도의 대략 3 배이며 인장 강도를 두 배로 늘립니다. 또한 강수 경화 전에 차가운 작업으로 인해 더욱 강화 될 수 있습니다. 이 니켈 스틸 합금의 강도는 1200F로 유지되지만 연성과 400 ° F의 온도까지 견고하게 유지됩니다. 용융 범위는 2400-2460 ° F입니다.
    Monel K-500의 부식성은 연령대 조건에서 니켈 Monel K-500이 일부 환경에서 스트레스-성분 균열에 대한 경향이 더 큰 것을 제외하고는 합금 400의 내식성과 실질적으로 동등합니다. Monel K-500은 Sour-Gas 환경에 저항력이있는 것으로 밝혀졌습니다. 고속 시어 워터와 고강도에서 매우 낮은 부식 속도의 조합으로 인해 Monel K-500은 특히 해양 서비스에서 원심 펌프의 샤프트에 적합합니다. 정체되거나 느리게 움직이는 바닷물에서는 파울 링이 발생할 수 있지만 피팅은 상당히 빠른 초기 공격 후에도 느려집니다.
    Monel K-500은 Monel 400과 동일한 부식 저항 및 특성을 가진 니켈-코퍼 합금입니다. Monel K-500은 알루미늄과 티타늄을 추가 한 결과 400보다 더 큰 강도와 경도를 갖습니다. 나이가 많은 상태에서는 일부 환경에서 스트레스 부식 균열에 대한 경향이 더 큽니다.

    Chemical Analysis of Monel K500 (UNS N05500)

    C

    MN

    P

    S

    Si

    Cr

    Ni

    Mo

    Cu

    Co

    Cb+Ta

    Al

    Fe

    other

    .25 max

    1.5 max

     

    . 01 max

    .5 max

     

    63.0 min

     

    27-33 max

       

    2.30- 3.15

    2.0 max

    포장 및 배송
    판매 단위 : Piece/Pieces
    포장 종류 : 합판 케이스 포장
    사진 예 :
    공급 능력 및 추가 정보

    포장합판 케이스 포장

    생산력100 Tons Per Month

    수송Ocean,Land,Air

    원산지중국

    지원에 대한 지원According To Client's Request

    인증 ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008

    포트Ningbo Port,Shanghai Port,Tianjing Port

    지불 유형L/C,T/T,Money Gram,Western Union

    인 코텀FOB,CFR,CIF

    연락하십시오

    If you have any questions our products or services,feel free to reach out to us.Provide unique experiences for everyone involved with a brand.we’ve got preferential price and best-quality products for you.

    *
    *
    Yuhong Holding Group은 중국에서 가장 큰 조달, 엔지니어링 및 계약 그룹 회사 중 하나입니다. Group Branch Company와 공장 은 ABS, LR, DNV, GL, BV, CCS, KR, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9001-2015에 의해 이미 승인되었습니다. , ISO 14001, ISO 18001, API 5L, API 5CT, API 6D 및 지점 회사 Zhejiang Yuhongwell Steel Co.ltd는 활동 분야를 확장하고 Duxplex 및 Super Duplex , Stainless Steel, Super Duplex에서 관형 및 평면 제품의 무역 및 공급에 들어갔다. 니켈베이스 합금 강철 , CR-MO 합금 강철 , 구리 니켈 합금 강철 , 전 세계 평판이 좋은 고객을위한 탄소강 . 이 제품들은 채굴, 에너지, 보일러 및 열교환 기, 석유 화학, 화학 산업, 식품 공장, 종이 공장, 가스 및 유체 산업 등과 같은 다양한 중요한 분야에서 널리 사용됩니다. Yuhong Holding Group은 지난 8 년 동안 파이프, 피팅, 플랜지, 밸브, 구조 강철, 코일 및 플레이트에서 풍부한 경험을 얻었습니다. 짧은 기간 동안, Yuhong Brand는 한국, 미국, 캐나다, 멕시코, 콜롬비아, 볼리비아, 칠레, 아르헨티나, 브라질, 에콰도르, 오스트리아, 뉴질랜드, 싱가포르, 말라 시아와 같은 40 개국 이상에서 전 세계적으로 입지를 기록했습니다. , 인도네시아, 태국, 베트남, 우크라이나, 터키, Sauid Arabia, Qatar, UAE, 이스라엘, 인도, 영국, 프랑스, ​​이탈리아, Gernmany, Poland, Spain, 우리는 귀중한 크로스 컨트리 파이프 라인의 주문을 성공적으로 시행했습니다. 고객. 또한, 우리는 전 세계의 가장 중요한 제조업체와의 대규모 연락처 및 전략적 동맹 네트워크를...
    NEWSLETTER
    Contact us, we will contact you immediately after receiving the notice.
    Copyright © 2024 YUHONG HOLDING GROUP CO.,LIMITED---ZHEJIANG YUHONGWELLSTEEL CO,. LTD판권소유
    모래밭:
    Copyright © 2024 YUHONG HOLDING GROUP CO.,LIMITED---ZHEJIANG YUHONGWELLSTEEL CO,. LTD판권소유
    모래밭
    질문 보내기
    *
    *

    We will contact you immediately

    Fill in more information so that we can get in touch with you faster

    Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

    송신